7.0 Amps, 0-3,000 RPM, 0-16,000/0-41,600 BPM
2-Speed Gear Box — Matches speed and torque to the job
Dual-Mode Selector — Easily converts from rotation-only to hammer drill mode
Variable Speed Reversing Switch — Complete control for drilling, driving and removing bits or screws
All Ball and Roller Bearing Construction — Smooth power transmission and extended tool life
Ergonomic Handle — Multiple gripping positions for increased comfort and control
360° Side-handle with depth gauge — Wide range of movement for comfort along with consistent drilling depth
120V 7 Amps AC only
Both models, the BT 60/4 and BT 65/4, have a proven 4-stroke petrol engine known for its low emissions and reliable start-up. The BT 80 D model with diesel engine is impressive due to its high compaction performance.
High reliability and durability
Excellent compaction performance
Low hand-arm vibrations
Easy, safe transport
Reliable engine start-up
Weight = 13
Frequency = 50-60
Voltage = 115
Rated amperage = 15
Overall size l x w x h = 13.75 x 6.25 x 8
Blade Size: 14 in / 356 mm14 in
Blade Shaft RPM: 2600Maximum Depth of Cut: 4-5/8 in (117.5 mm)
Arbor Size: 1 in / 25.4 mmPower: 11HP Gasoline
Weight: 75 lb / 80 kg
Wacker Neuson's diaphragm trash pumps can move almost anything that flows. Built with high quality components, you will be assured of many years of top performance and durability. Designed to handle solids up to 1-5/8 inches (41mm), ideal for dewatering mud slurries and seepage areas.Aluminum alloy body with heavy-duty pump diaphragm provides a lightweight, low maintenance package that ensures long life.Hardened forged gears extend pump life and provide efficient power transmission from the engine to the pump.Ductile iron crankcase provides maximum durability.Oil bath lubricated transmission ensures continuous lubrication to all parts of the gear transmission system, reducing both maintenance costs and lost production time.Large, solid rubber tires provide excellent traction and smooth rolling over rough terrain.Surge chamber on inlet side results in smooth pumping operation by absorbing pressure spikes while reducing wear.Straight through water flow design provides high produ
Cut Force (with 45 lbs applied): 7100 lbfBlade Type: 2 off 1/4 inch Square section - 10 inches longCam Movement: Block Clearance .118 inches - Cutting .079 inches Block Depth: Min. 2 inch up to Max. 3.2 inchMax. Cut Length: 10 inchWeight: 42 lbsOverall Dimensions: 9.6"H x 5.5" W x 30" D
Reliable, 3/4 HP direct drive, sealed induction motor-75% quieter than right angle drive motorsRip cut 14" and diagonally cut 10" tile. Cast aluminum motor housing and blade guard.Welded steel frame. Rigid cutting table. Patented, self-cleaning cutting table roller guides.
Rip cuts up to 19 and can diagonally cut 13 tiles. Blade capacity is from 6 to 10, including 6 profile wheels 1-1/2 hp belt driven electric motor
Folding stand with wheels
Blades Sold Seperately
4-position blade clamp allows for flush cutting and increased versatility
Powerful 10.0 Amp motor designed for heavy-duty applications
Keyless lever-action blade clamp for quick and easy blade changes
0-2,800 strokes per minute and 1-1/8" stroke length deliver fast cutting
Variable speed trigger allows user to instantly control speed at the trigger
With the Laserplane Leveling System,you can perform any two-personleveling task with only one person.
22X Automatic Level1/16-in.(1.5mm) at 100-ft.(30m) leveling accuracyUp to 200-ft.(60m)
Wire-hung magnetically dampened compensator- within ±15 arc minutes of level
Built-in sighting scope and bubble vial
Soft control knobs1:100 stadia for distance estimation
Horizontal circleInfinite tangent screw
22X Level-Transit1/4-in.(6mm) at 100-ft.(30m)
leveling accuracyUp to 200-ft.(60m) range
Clamp and tangent screws
Used when pouring concrete. It is used to push the gravel in the concrete down in order to prevent the gravel from interfering in the finishing process. The concrete finisher will move the jitterbug up and down as he walks slowly backwards. The jitterbug has numerous holes across the bottom plate. These holes allow the cream of the concrete to come up through the holes and at the same time push the gravel further down into the foundation. This process takes place right before the use of the bull float to smooth the top of the freshly poured concrete. Because the gravel has been pushed further down, the bull float will produce a smoother finish. Today it seems like many of the concrete finishers have gotten away from using a jitterbug.
Voltage 120 AC
Chuck Size 1/2 in. Amps 7.0
Chuck Type Keyed
Spindle 1/2 in.-20
Gear Train Triple
Cord Type 8 ft. Fixed
Construction Type Grounded
Length 14-3/4 in. Tool Weight 6.8 lbs.
Chuck Size (In.) 3/4
Drill Point Pressure (Lb.) 1630
Drill Travel (In.) 9.0
Motor HP 2.0Amps @ 120V 12.5
Handle Type Reversible FeedCord 3 Conductor, 9 ft.
Tool Length (In.)15
Tool Weight (Lb.) 62
Height (In.) 20-1/2
Chain not included,
6" maximum bit capacity
3.5 HP/15 amp
Motor 800 RPM single-speed gearbox Mechanical clutch. Weighs 40 lbs.
Overall height 34-1/2"
19" drilling stroke Electric overload protection
Handle for portability 2" x 2" column
Reversible capstan handle - can be placed on the left hand or right hand side of the carriage
Non-Reflective Traffic ConesTough, weatherproof orange PVC traffic cones have a tip-resistant, weighted base. Maintenance-free, non-fading PVC resists peeling, cracks and moisture. Meets MUTCD standards.
LENGTH INCHES 13
WIDTH INCHES 13
HEIGHT INCHES 28
COLOR FINISH Orange
The RentalPro 230 is a solid workhorse sprayer with performance points to cover both interior and exterior painting needs. Lightweight and portable, the RentalPro 230 is the ideal airless paint sprayer for the homeowner DIY'er and professional contractors.
12x18 orbital sander with dust containment. Use a white or red 12x18 scrub pad as the base to attach the sandpaper. Perfect for a light screen and recoat, parquet floors, landings, closets and decks. This sander can be hooked into a tank vacuum. Clarke OBS18DC
Sand paper available for purchase