All Multi-Movers roll easily for moving bulky items including inflatables, portable toilets, propane tanks, roofing materials, plants, tables, chairs, plus much more. As an added bonus, you’ll never have a flat tire again with our closed cell foam tires.
Folding Foot Plate: 17”D x 26”W
Durable lever dolly allows one person to prop up extremely heavy loads up to 4250 lbs. Lever dolly has 5in.W x 3in.D reversed beveled nose iron and semi-steel wheels with plain bore. 72in. hardwood handle has smooth rounded edges.
These High Velocity Round Portable Fans circulate large volumes of air. Economical, easy to move.
This powerful industrial floor fan features a 1/2 HP motor to keep you and your workers more comfortable without pulling more than 7.4 amps!
*345 ft-lbs of deliverable torque in forward and reverse
*1/2" detent pin anvil
*AC/DC forward/reverse rocking switch
*Soft grip handle for increased comfort
*Max Torque 345ft-lbs
*Tool Length 11-1/4"
*Tool Weight 7.0lbs
*4.2 Amps, 5,000 SPM
*Lock-on/off switch — for extended use applications
*Compact design — slim tool housing comfortably fits in the hand
*Reversible side blades — for extended blade life
*Cutting blade changes quickly and without tool — for convenience
*Fast cutting mechanism cuts at 28 feet/minute
*Double insulated, UL listed, complies to OSHA
*Sealed switch — Keeps debris out of the switch mechanism and extends switch life
The Model 445 is a pneumatic Powernailer® which uses 16 gage cleats for the installation of Tongue & Groove hardwood flooring.
The Model 445 is recommended for use on 5/8", 3/4" and 33/32" flooring.
Cleats Available for Purchase
Adjusts from 6' to 8'
35U The Powernailer® Model 35U SN is used to nail hardboard underlayment using Powernail's exclusive 1"U Powercleat® nails.
Using the model 35U and the 1" U Powercleats® will eliminate surface dimpling and nail popping.
This combination has been engineered specifically for hardboard underlayment applications, no other machine compares with the operating efficiency of the model 35U SN for hardboard underlayment.
Cleats Available for Purchase
Powernail Model 200 is recommended for use on 5/16", 3/8", 1/2" and 9/16" Engineered, Tongue and Groove flooring. using 20 Gage Powernail PowerCleats.
Nails Available for Purchase
The Model 45 is a manual, single-blow nailer which use 16 gage cleats to install Tongue & Groove flooring.
The Model 45 is recommended for use on board sizes of 5/8", 3/4" and 33/32" Tongue and Groove flooring.
Nails Available for Purchase
Whether you are a do-it-yourselfer or a professional, the ratcheting mechanism of the Powernail Model 101R Surface Nailer allows you to strike the tool multiple times to set the nail. This feature lets you work in close quarters with less effort and fatigue. The manual surface nailer, built with a forged and precision machined ratchet system, can also be used as a single strike nailer. The model 101R uses 16 gauge, L shaped Powercleats.
*Made in the USA
*Precision machined ratchet system
*Ratcheting multi-strike nailer
*Less fatigue, less effort
*Can be used as a single strike nailer
*Easy to use in close quarters
*No air compressor required
Nails available for purchase
The Belle Group MiniMix 150 Electric Concrete Mixer is ideal for small to medium sized building projects.
Perfect for professional, rental and DIY users.
*Batch Output Capacity: 3 cu. ft.
*Premix Capacity: 1-1/2 bag.
*Drum diameter: 24".
*Motor Specifications: 3/4 hp, 115V, 60 hz.
*24 RPM drum speed.
*All steel drum construction.
*Mixes a full barrow load.
*Includes a stand for easy barrow height tipping and mixing.
PORT-A-LITE products help workers produce their highest quality work in concrete finishing, paving, masonry, roofing, excavation, mining, refineries, quarries, demolition, waterfronts, training sites and special events. Worldwide and domestic voltages available on request. CSA approved machines available.
• Single 1000W SHO fixture, 120V/11A
• Fixture storage on base
• Lights adjust in all directions without tools
* Heats up to 2,400 sq. ft.
* 100,000 Btu/Hr.
* 13.5-Gallon Tank
* Runs Approximately 18 Hours Per Tank
*350,000 maximum input BTU/hr
*Consumption of 2.50 gal/hr kerosene
*Salamander / Torpedo Style Heater
*75-125,000 BTU Output/Hr. Capacity
*2,350 sq. ft. Heating Area (based on 40 Degree F heat rise and 8' ceiling)
*370 Hot Air Flow (CFM)
*3.0/3.9/4.6 lbs., .71/.93/1.1 gal. Fuel Consumption per hr. approx.
*1/8 HP Motor (60hz, AC, 115v.)
*Automatic fuel shut off
*Thermostat not available for this unit
*P.O.L./Excess flow valve
*Flame out sensor
*3/8" ID 10' U.L. Listed Rubber Hose
*High capacity blower
*16.5" H x 9" D x 25.5" L
*Weighs 24 lbs.
Propane available for rental
Reddy Heater 150
• 150,000 BTU/Hr rated
• Kerosene/ #1 Diesel or #1 Fuel Oil
• Amp draw = 2.5 (operating), 115V
• Length = 37.5 in., Width = 22.4 in., Height = 24.9 in.
• Tank capacity = 10 gal.
• CSA certified
•Powerful 15 amp, 4 HP motor
•Bevel fence; 0-45 for angle cuts
•Heav duty steel wheel gaurd
•Quick release locking vise for easy operation
•Large carry handle
•Cut and hardened steel helical gears provides durability and long life
•100% ball and roller bearings
•Spindle lock; fast wheel changes
120,000 btu kerosene heater with electric blower
55,000btu heater, kerosene with electric blower
3 gal capapcity
*10" Working width will grind approximately 400-500 sq. ft. per hour at 1/16" with an EDCO Diamond Disc
*Grind wet or dry
*Standard vacuum port
*Less torque on operator
*Tapered roller bearings have improved seals for longer life and less maintenance
Stone Inserts, Diamond Inserts or Tungsten Inserts are additional items to operate the machine.
This tool can be used in general construction as well as utility work, and plant maintenance. It is designed for drilling through granite, hard faced rock, quarry drilling and for drilling secondary holes for blasting.
*3.8 Amps, 0-1100 RPM
*Easy to actuate paddle-type switch
*Low profile design for drilling in close quarters
*Small chuck offset makes it ideal for drilling in tight spaces
*Variable speed dial for matching speed to the application
*Versatile 12 lb shear for precision cuts on a wide variety of flooring and siding products
*No dust, noise or electricity increases productivity and saves in costly clean-ups
*Cuts laminate, engineered hardwood, fiber cement board, vinyl and PVC tile up to 13 Inches in width and 7/16-Inch depth
*Includes built in fence and easy to use safety lock
*12 lbs, 24 by 13.25 by 3.5 boxed dimensions;
Ideal tool for light to medium demolition work as well as for use in confined areas. This lightweight tool can tear down concrete or brick walls, break up concrete floors, or be used in any other type of general demolition work.